House for the well - photo, design, construction of their own hands

By Admin | Garden And Buildings / Landscape Design
12 May 2016

to have a supply of clean, cool water, since ancient times people build wells.Actually it is today, especially for truckers and owners of country houses.And that did not fall into the pit various types of garbage, insects and fallen leaves, and does not pollute the water, install the roof, in other words - a house for the well.

Content

course, such structures are commercially available.But if you go to the market, you will see that it is fun is not cheap.So maybe easier to build a house with his own hands?In addition, nothing complicated about it.

need or whim?↑

take care of the roof arrangement for a well needed in the event that water from the well is planned to be used not only for irrigation area, but also for cooking and drinking.And it's not a fad, but a necessity!

House to protect the well from<div><script async src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<!-- buildguide1 -->
<ins class="adsbygoogle"
     style="display:inline-block;width:336px;height:280px"
     data-ad-client="ca-pub-0595814978628489"
     data-ad-slot="3306712831"></ins>
<script>
(adsbygoogle = window.adsbygoogle || []).push({});
</script></div> contamination and freezing
House to protect the well from contamination and freezing

Lodge prevent ingress into the pit of dust and dirt.This structure can protect the water from sunlight.As you know, when warming up the healing properties of water are lost!

harbored well need to avoid getting into the chemicals in treating the plants and rainwater.In addition, the house will help to forget about the water freezing in the most severe frosts.

Getting Started ↑

Most gardeners choose this option, we do.They build a house of their own.But before you begin construction immediately, is to determine what will be the roof.

House perfectly fit into the design of the site
House perfectly fit into the design of the site

The search engine is recommended to dial "house for a well photo" and view the proposed options.At the same time we should not forget that the sump house must necessarily fit into the established design of the land.It is necessary to use building materials, combined with other buildings of the infield.

dwelling often made of wood, such as boards, beams or beams that are available to the home at the end of wooden structures house.The roof can be 2 or 4 ramp to be peaked or flat.The coating is made of tar paper, metal, tiles or planks.

Important!The tool must be prepared in advance!In the construction of shelters for the well will need: jigsaw, circular saw or hand woodworking machine, building level, hacksaw on wood planer, Phillips screwdriver, hammer, spade, gvozdodёr, pencil and tape measure.

So you need to log ostrugivat
So you need to log ostrugivat

begin construction of the house is worth more time to consider how to make the house well.The first step recommended rammed earth around the well and align it podsypaniya through the rubble.To control the level of alignment is recommended.Choosing the rubble, it is better to give preference to a material that has a section close to 50 millimeters.Area of ​​gravel is needed to install it on the frame.At the preparatory stage should also planed boards and crop the material to the desired size.

device wooden frame ↑

When constructing an object such as a house for the well drawing is of great importance, because it allows to calculate in advance the exact amount of the material and its dimensions.To make better use of rack 80 mm bar.Cutting board is needed for the lower and upper piping, which was previously cut to the desired length.

Cottage framework for a well - correctly calculate the amount of material
frame house for the well - correctly calculate the amount of material

strapping frame is as follows: on a flat surface placed two legs and they nail the board fixed the upper and lower trim.After that, it repeats the second pair of uprights.To achieve high reliability of fixing must be used for fastening one place for four nails.Then the design is placed near the ring well.With strapping side walls connected to each other back and front walls of the house.

Roof manhole house ↑

basis perform roofing trusses that are built of boards, which have a length of 180 mm and a thickness of 30 millimeters, and the bar for struts and crossbars with longitudinal section (25 millimeters).It takes a whole 8 struts 40 centimeters, 3 bolts to 30 centimeters each, 8 rafters to 180 centimeters.

Roof house made of boards
The roof hut made of boards do, but they can replace any roofing material

The top of the truss elements are fixed with screws.Pre for easy connections they should be cut at a bevel.To fix the construction of farms and the upper binding recommended to make technological cutout design nails fixing a length of 120 millimeters.

The roof lodge for a well made to strengthen the struts, and the top roofing frameworks need to connect the boards, which function as the ridge.Further downward crate made at intervals of 10 - 15 centimeters, and the projection of the rear and front walls 10 centimeters.

remains to cover the roof with roofing material for waterproofing and make trim.Casing frameworks are sheets of slate.Sheets of slate that goes to trim, should be divided into two parts and slate nails to attach to the frame.Corner connections should be closed by the casing tamping them wind boards.

Boarding houses for the well walls and installing doors ↑

door to the house, which measures 85 by 55 centimeters, required edged boards and 3 bar dimensions 25 by 30 millimeters.Boards should be cut in height to the desired size.In this case, the figure is 85 centimeters.Lay the board should be on a flat surface in the form of shield, the top and bottom boards have bars, connecting with one another board with them.

Important!For fixing screws are used, 4 to equate the top and bottom of the door panel.That at the closed-door opening is not skewed, between the connecting bars on the diagonal door attach the bar stiffness.The walls of the house should sheathe edged boards.

Fixing the door
functional furniture house door installed on standard doors to install any rules

for door canopies should take piano hinges, which on one hand are fastened to the door, and on the other - to the skin of the gable.To house served for many years, all wood to be processed atseptikami and decorative finishes perform toplazuryu "under the tree."House for a well prepared with their own hands and still enjoy its functionality and elegance!

finishing the well house ↑

sump constructed house, special attention should be paid to its decoration.Wooden houses fit perfectly in any design option and look good in combination with the well laid around a green lawn.To enhance the effect, you can cap the well pour gravel, can be laid out near large rocks or have a paved area.

Installation of concrete roof tiles
installation of concrete tiles

When lifting water from a well used "Crane", the top of the log-support can be decorated with decorative lights that will illuminate at night at the well space and simply serve as an unusual decoration.If you like the rustic style, the colorful building you can create in people's motives, decorating it with tiles."Fabulous" house will resemble a dwelling gnome.

Video: metal house for well ↑

you already know how to build a house for the well!What is more important.He must perform the main function - to keep the water clean and icy, delicious in the world where there is nothing!