Creating a pleasant and cozy atmosphere in the kitchen not only depends on cleverly chosen and comfortable straddling the beautiful furniture, but also on the proper placement of lighting devices in it.Proper lighting in the kitchen will highlight and emphasize the beauty of the interior, to delineate areas and give the kitchen a unique look.Creating such a light - it is quite laborious and requires certain skills and abilities.
project solves all problems ↑
To create the lighting in the ki
- upper and lower light sources should complement each other and have the same level of lighting so as not to create discomfort in the room;
- if the additional wall lighting fixtures, their light should be soft and slightly absent-minded;
- for a brighter illumination of working areas, you can use lights built into the bottom of the wall cabinets;
- to illuminate working areas should be used lighting with diffused light.This will help avoid the glare of the glare during cooking.Also, diffused lighting to be used in the interior, where a lot of chrome and glass surfaces;
- for a more comfortable work surface and lighting to create an individual lighting lamps can be used with a swivel rotation, mounted on the wall;
- when the work area is located in the center of the kitchen, its lighting is used for ceiling lights and built-in hood lights;
- when creating a project, you must pay special attention to the colors of the kitchen and, on that basis, to pick up the spectrum of light, so as not to hurt the eyes.
Important!When planning the placement of lamps is important to consider this option as shading.Ideally shadows from surrounding objects when the light should not be.
kitchen lighting options ↑
When creating a project kitchen lighting uses three main options that are most appropriate for the planning of our kitchens.In the first embodiment, the total coverage is formed from two light sources - above the work surface and above the dining area.In both areas to create an optimal, quite bright lighting, which complement each other.Then apply all possible lights, mounted in a hanging or suspended ceiling, suspended or mounted in cabinets or just glued to the surface, such as LED strip.This variant lighting project is perfect for medium and large kitchen with an area of more than 12 m2.
The figure photo lighting in the kitchen with a large area
second version of the draft in addition to the two main sources of light, high and above the worksurface provides additional sources which are placed on the walls.Each additional lamp has the ability to change the angle of illumination.This variant lighting project will enable visually expand the space a little bit, that is perfect for small kitchens.The additional light source shall emit a soft, unobtrusive light.
The figure photo lighting in the kitchen with a small footprint
third option is designed for very small kitchen area of about 6 m2.It is important every detail, from the color of the walls, finishing with multiple light sources and brightness.Commonly used pastel shades or cool colors for the walls and installed a powerful lamps to overhead lighting and 2 - 3 additional mobile lamp with soft light for working surfaces.
The figure photo lighting in the kitchen with a very small footprint
Another option lighting project is the lighting in the kitchen - living room.Today kitchen-living room is gaining popularity, and it is increasingly to be found in the projects of alterations or new projects already in homes.To highlight the kitchen-living room, you can use almost the entire arsenal of lighting products ranging from conventional incandescent lamps and ending with LED lighting.
The figure photo lighting in the kitchen-living room
main thing when you create a project for the kitchen-living room to observe the following rule: a clear zoning kitchen and living roomby the brightness.So much for the living room should be set less bright lighting on the walls and the ceiling, while the kitchen, use a bright overhead lighting in conjunction with point illumination of work areas.If the kitchen and the living room separates the bar, while the main stream of light should be directed to her and working areas of the kitchen.
How to overhead lighting ↑
for kitchen lighting at night is mainly used overhead lighting.In addition, if the kitchen has no window or entering therethrough light enough, overhead lighting acts as a substitute for natural light.In both cases, the function of the upper lighting is to provide good light cuisine.Therefore, when creating overhead lighting can be installed one powerful lamp in the center of the ceiling, or several small around the perimeter of the ceiling the entire kitchen.You can also combine one large central and several small around the perimeter.
Today especially popular suspended ceilings.Such ceilings are opening a lot of opportunities to contain many small spotlights.In addition, you can use the internal illumination of suspended ceilings, which will create the illusion of a cloudless sky or absence of the ceiling itself.Yet a further possibility of increasing the amount of light is illuminated in the kitchen ceiling.To do this, you can place hidden LED lights around the perimeter of the kitchen in a recess or a false ceiling directly above hanging kitchen cabinets.
creating general lighting in a small kitchen, it is necessary to follow the rule of economy and ergonomic placement as furniture and lighting.The space is small, so the best way is the zoning of all premises.To achieve this, it is possible to install the suspended ceiling in the powerful spotlights.
Important!To achieve the greatest effect on the zoning kitchen by proper placement of lighting can create a new group of switches for each of the zones.
Lighting working area cuisine ↑
If overhead lighting is responsible for overall illumination of the kitchen, for the working areas must be provided their own light sources.This is necessary for two reasons.Firstly, local sources of light for working areas will more clearly identify areas countertops, stove or sink.Second, regardless of the brightness and power of the main light source, the working area for various reasons may be in the shade, and additional light sources help to avoid this.
To get a well-lit work areas, lights should be placed at a certain level and a certain place.To do this it is necessary so that the incident light from a lighting device overlaps one or more working areas.To address this issue, you can use elongated tubes that are placed under the overhead lockers or attached to the bottom of them.
now gaining increasing popularity of LED lighting kitchen.This type of lighting is simple and reliable in operation, economical and easy to assemble.To create illumination of the working area simply glue the LED strip to the bottom of wall cabinets.Also, the LEDs can be installed in lighting fixtures, but their installation in kitchen furniture have to make a special order from the manufacturer of furniture for special holes for the lamp.
Installing LED lamp or mounted lamps is not particularly difficult.To install enough Drill holes for fasteners and replace.LED tape is simply glued to the desired location.For convenience, the lighting of the working area, you must install a separate switch for them and lay on a wire hidden or external means.
Create lighting for the kitchen is a very interesting experiment for beginners and a lot of fun to professionals.Games with light and its intensity can create a unique atmosphere and individual comfort for every kitchen, reflecting the preferences and the inner world of the owner.