Every owner of his home in the apartment trying to create a comfortable environment, resorting to different materials and technologies.Trying to combine the processability of work, material and environmental designer fantasies.To help in solving such a difficult task may cabinets plasterboard.Made of natural material such designs easily fit into any environment, creating comfort and harmoniously combine functionality and beauty.
modern environmentally friendly material ↑
without the help of a professional, everyone, make the effort can make a wardrobe of plasterboardwith their own hands.Drywall - a modern material
Articles of plaster able to pass air, thus creating a favorable atmosphere in the room.In addition, gypsum is not radioactive, termoneytralen and has high thermal and sound insulation.For the strength of the material corresponds to a cardboard envelope, optimizing specifications plate.Due to the elasticity of drywall it can be used in manufacturing various articles of any shapes.
cabinet manufacturing process plasterboard ↑
further describe how to make a wardrobe of plasterboard in stages.
choice of location and material for cabinet ↑
first stage - the definition of the place of the future cabinet.To make it fit in the allotted space, you need to create a drawing of the future design, considering all the fine details.How and what will the shelves, the distance from the first leg to the bar to another.The locations of mounted objects products should be positioned jumpers.By drawing frame made of future products.It can be made of wood blocks measuring 60 to 40 or metal profiles.
In the first embodiment to the selection of suitable tree very carefully.It should be of high quality and dry.In other wooden components can be deformed with time, "pulling" for an entire structure.Metal profiles more easily secured and they are not deformed.The only condition that must be taken into account the load on the cabinet design.The wooden base can withstand more weight.Therefore, decide which items will fill the shelves, and on this basis, select the material for the frame.The most appropriate thickness of the gypsum boards approximately 12 mm.
markup future construction ↑
Before build plasterboard built-in wardrobe, move the dimensions of the future construction of the wall, ceiling and floor.It is necessary to be precise down to the millimeter, so that when drywall was no inconsistencies.For precision application of labels using horizontal level, vertical - a plumb line.
to one of the walls, or directly to the two (if you are building a wardrobe in the corner of the room) cabinet is mounted flush.It will support the future construction.The surface should be leveled and cleaned.In places gasket profile on the floor and wall mounted special shock-absorbing tape.This is to ensure that any vibration from the floor and walls are not transferred to the structural member.
construction frame for cabinet ↑
Further along the planned lines with dowels and screws fasten the guide profile.First, on the wall, then on the floor and the ceiling are fixed structures, which will act as guides for the vertical rails.They alternately inserted rack profiles.Junctions beams are fixed with metal plates.This will give a more reliable product.Begin to build the structure of the wall to the corners.Fasteners made screws or bolts.
device frame includes basic engineering fastening devices: shelves, drawers, hinges and more.In areas involving a heavy load, the frame reinforced by transverse slats.Since drywall is not designed for heavy loads, some of the details of the future cabinet are made of safety glass, wood or metal plates.Such decorations adorn not only the product, but also to increase the functionality of the design.
Boarding frame plasterboard ↑
Upon completion of the installation of the frame start to trim bases plasterboard.As a tool for cutting the material used joiner knife, hacksaw or jigsaw.When selecting the size of FCL, consider the size of the cabinet, that there is less waste.The thickness of the sheets depends on the expected load.Smooth edges can be obtained, processed sheets in a flange plane.
for measuring the length of the sheet is very convenient to use a T-square.Then it turns out a flat line on which is undercut with a knife at the beginning and end locations of circumcision.Sheets of plasterboard falls on the edge of the table so that the line cutting and an extra end to extend beyond the edge.Hold the edge of the table, gently hit his hand on the protruding end.This sheet must break in on the target line.Whole remain only paper from the bottom of plasterboard, which can be easily cut with a knife.
drywall joints in the middle of a vertical stoic profile.After plastering they are practically invisible.Mount GCR is performed on the profiles of powerful drill very carefully, in increments of 250 mm to avoid damaging the fragile material.To make perfectly smooth corners of the cabinet and to protect them from destruction, apply reinforcing paper, metal or plaster grid area.In the manufacture of furniture overall sheathing frame preferably with two sides (inside and outside).
primer before the finish product ↑
followed by primer design.After it dries sealed seams gypsum plaster with mesh-serpyanka.This is followed by the whole surface coat.It can be done in one or two layers.After drying each layer is smoothing skin.The final step is the application of the topcoat.
If desired, you can make a wardrobe of plasterboard.The technology is essentially the same, but the depth of such a structure is not less than 0.6 m. After embedding the seams in the doorway at the top and bottom rails are fixed and inserted into the door.Ready cabinet of plasterboard in the end result may look different.
each by making the product at will, can create a truly unique design.Paint the cabinet in any color, wallpapered or covered of self-adhesive film - is not important, the main thing that your creation is unique.