Today garage - is an essential element of life for most families and car owners.It not only protects against a number of external factors, the car itself, but also successfully placed a variety of tools, made locksmith work.That is why the finish of the garage is given special attention.I was no exception and the floor, which must withstand considerable loads.One of the options for its decoration is a wooden floor in the garage.
basic requirements to the floor in the garage ↑Due to the nature
space garage floor must meet several requirements, compliance with which will provide a durable and high-quality coverage.
So, the floor in the garage should be characterized by:
- a high degree of resistance to mechanical damage.
- resistance to chemical substances.
- good moisture resistance.
choosing one or the other sex for a ga
1) Can I make the floor yourself?
2) Will it make it reliable and affordable?
3) For how long is enough of sex?
So, if you decide to opt for a wooden floor, it is necessary to strictly observe the technology of its styling.
laying wooden floor ↑
To make the wooden floor in the garage needed lags 100x100 mm.With their help made uniform distribution of load on the floor surface.Garage owner should remember that wood flooring is fairly inexpensive option for a garage, but its durability is small - about 5 years.Even high-quality waterproofing is not able to increase it.
large number of different chemicals "istachivaet" wooden floor and car tires affect the integrity of the coating.Despite the fact that these drawbacks occur in the garage floor of wood fairly widespread.
So begin laying the floor, you need to take care of his firm, level base.It does not allow covering prosest of gravity of the machine.Today decided to allocate 3 variants of arrangement of such a framework:
- installation in the ground small brick columns.
- installation as a basis for concrete columns.
- Pouring rough concrete base.
Due to the fact that it is rather difficult to establish the same level of bars throughout the area of the garage, using a solid foundation of concrete.
Experts do not recommend installing wooden logs directly on the ground.It is a small layer of sand and gravel, covered with waterproofing.This is a mistake, as in this case, Paul received unreliable and serve no more than two seasons.
recommendations for self-styling ↑
wooden coating can be single or dual.Typically, a two-layer structure is used when the owner plans to insulate the garage floor.In this case, first fit rough coating layer after the heat-insulating material with a waterproofing coating and finishing of the floor.Particular attention should be paid to the vapor barrier.
However, to date the most widely used, nevertheless, prepared in a conventional single-layer design.
Mounted lags need to carefully handle an antiseptic quality and dry.The permissible level of moisture content is not more than 10%.Laying is carried out with a certain lag step, which is usually equal to 40-50 cm.
primarily placed on the prepared surface Lighthouse lags.Their step is about 2 m. The correctness of installation is carefully checked by a building level.Fasteners lag is carried out by use of dowels at a distance of 50 cm.
similar scheme laid intervening lags.After fixing the entire frame can safely proceed to the installation of wooden floor boards.They fit tightly enough, and perpendicular to the joists.Fastening by means of screws or nails.
Thus, the installation of a wooden floor in the garage is quite simple, and run it under the force of even a simple layman.However, it should be clearly defined in the Selecting the floor and follow the technology of its styling.
Video: do not forget about the entrances ↑
process device wooden floor is completed?Do not forget that a reliable rugged entrance to the garage: