Gates for garage - types, their features, advantages, disadvantages

By Admin | Garden And Buildings / Garage
20 April 2016

Gates for garage must be reliable and durable, because they keep trucks from criminal attacks.Their functionality can not be overstated, and in order to make a rational choice, you need to have a general idea about the features of different kinds.Today, the purchase of the gates is no problem, many manufacturers sell ready-made products and made to order.To do this just to properly carry out preliminary calculations, determine the automation and other advanced features.

Content

practical comfort Automatic ↑

garage - the main place to protect the car, it can be placed outside the home, or directly incorporated into the architecture of the house.Garage doors can be called the most vulnerable element of the structure, because they are constantly exposed to abrasion and weathering.For this reason, metal gates for the garage are th

e most popular, because this material is durable and can withstand the test of time.

Modern ideas are radically different from the previous years, most recently Swing gates were the most common type - reliable, solid, lockable on granary locks impressive size.And a special alternative in the Soviet period it was not, but on the market there are new kinds of garage doors, interesting, practical, able to satisfy all tastes.

Important: at the present time are equipped with gates for garage (by the owner) different types of automation, they are easy to use, they are sold at reasonable rates, available in almost all segments of the population.

fact, automatic gates for the garage conventionally divided into domestic and industrial.Recent designed for a large number of cycles of open / close.But the cost of the finished product may vary depending on the characteristics of components and the size of the gates themselves.In any case, it is advisable not to save, because the garage must be adequately protected.Even better equip them with electric drive, to avoid wasting time and effort on the opening / closing.

With automatic gate man gets rid of unnecessary movements, you have to repeat the procedure every day pretty much accelerated.In addition, this type of garage door has the following advantages:

  • ease of management - for the work necessary actions do not have to leave your vehicle, simply press the button on the remote control.This is especially valuable in rainy and cold weather when leaving the car does not want to;
  • saving time - seconds and the desired process implemented.Undoubtedly, it is very important when the driver is late for work, in a hurry for personal reasons, while every minute counts!
  • use additional functions - for example, you can set a specific time when the gate should close.That is, even if in a hurry the owner forgets that the door remained open, it's not a problem.
  • comfort and practicality.

Selection of garage doors: Hinged ↑

Gates for garage Swing - mostly fabric consists of two wings.Their distinct advantage - a great burglar because it is used in the manufacture of thick steel (may be sheet metal, sandwich panels, wood), and the design is equipped with robust bolts, the anti-pins, locks safe type.With the addition, these gates have a variety of design options, various forms, they are easy to install and use.

Iron Gate
Metal gates just a popular option drawback - requires a lot of space, create an inconvenience when opening and cleaning the snow around the garage

But there is this popular and disadvantages that are necessarily available free space for opening the valves, andin winter it is necessary also to work with a shovel, clearing snow from the area.With regard to automation, it is possible to conduct, so to speak increasing usability.But for comfort will have to pay: to a certain extent reduced burglar to the same drive, which will be located in the opening, make it a little already.

Gates for garage iron can be insulated, because a warm place for the car - not a luxury but a prerequisite of maintaining the vehicle in good condition.The heat insulator is placed between sheets of finish (wall paneling, decking) and insulated circuit that is used a brush seal.

Important: swing gates can be equipped with additional functionality: a gate, a set of photocells security alert system, lighting.

rollback door cabinet ↑

Their principle of action reminiscent of the movement of the door closet.The design of such gate includes fixed above the opening of the guide, in its web shifted to the side, so passage is released.Such gates are installed in private garages, factories, because with their help, overlap sufficiently wide openings.

tilt-type gates ↑

Lifting gates for the garage allow maximum use of the width of the opening.Their principle of operation is as follows: the web rises simultaneously deflected towards and located (in open position) parallel to the ceiling.The main advantage - writing in any design.

They are easily automated and can be equipped with a wicket: a built-in web and freestanding.A major disadvantage is the possible damage to the flap opening object located within reach.Therefore, we must closely monitor the distance, without approaching a dangerous distance to the opening goal.

Gates for garage
Lifting gates for the garage without problems equipped with automatic

Oh and tilt-up gate "decrease" in the height of the garage open, thus creating the overall limit for the entering vehicles.

Important: this type of gate is not in great demand, and all because of the high prices and limited choice.

Round view - rolvorota ↑

rolling shutters garage are still some names: curl and rolvorota.Their principle of operation is very similar to the one used in the shutters.Door leaf (generally composed of aluminum plate) is twisted in a compact coil which is attached to the wall at the inlet or on the ceiling.

Round type gate
Cons rolling shutters - Burglar resistance is low, the inability to embed additional door

These gates are considered the young, the main advantage - the possibility of installation even in small spaces with high opening.Thanks sipes lightweight aluminum gates, and polymers which are a part, provide excellent heat-saving performance.Accordingly, the operation of the automation does not require a lot of energy.The only significant drawback - low burglary resistance, and of the impossibility of installing the gate.

Sectional doors to garage ↑

gate design data consists of sections, which in turn move on rails and hide the ceiling thanks to a system of rollers and springs.Gates for garage Sectional have such advantages:

Sectional doors
Sectional gates can save space, made of materials that exclude the heat loss
  • saving space;
  • reliable operation;
  • if necessary repair, the mechanical damage of individual sections can be replaced by the customer;
  • door sections, referred to as the sandwich panels are distinguished by low thermal conductivity.This means that they can be installed in unheated rooms;
  • possible infeed gate;
  • fabric can be collected from the panoramic transparent materials, ie garage door turn the original storefront.

But there are a few drawbacks:

  • garage height restriction (and this is a definite disadvantage);
  • requires a jumper in the opening.

wishing to establish their own sectional doors in the garage to help video lesson:

To summarize I must say that when choosing a garage door the main criterion is to ensure that the car theft, as well as the design should be reliable and secure.