Soapstone stoves - facing and specificity of the best material for finishing stoves

By Admin | Garden And Buildings / Banya
21 April 2016

Talkohlorit - natural stone formed from volcanic lava billions of years ago.In those days no one could think of (although I think it was, and no one) that the material in the 21st century will be the ideal companion of man in the decoration of apartments, houses, baths, garages and other facilities.It looks great and inside the building and outside.A soapstone stoves have become so popular that by going into the first sauna or bath, you are sure to see this is the finishing material on the front of the heater.

Content

characteristics of the rock ↑

Talkohlorit - clean rock formation, which has unique characteristics that are specific to it.

  1. high heat capacity - 2.5 times higher than that of a conventional furnace brick.For two hours the furnace oven accumulates so much heat that it will last
    for the whole day, and therefore can be a good idea to save on firewood and charcoal.
  2. Rapid heating - the material is heated to about 4 times faster than clay bricks, which reduces not only the time of the furnace, but also reduce costs for the purchase of kindling material.That is again the savings!
  3. resistance to melting - even the astronomical temperatures are not able to influence the attractive appearance of soapstone, because, as mentioned above, the rock formed from lava, the temperature of which is many times greater than the one that is created in the bathhouse furnace.
  4. magnificent structure - a luxurious natural stone is the best accentuate the beauty and style of your bath.
  5. Durability - once trimmed stove or fireplace this stone, you will forget about this work 20 years, or even 30.
Talkohlorit
natural mineral - talkohlorit warms up quickly, retains heat for a long time, improves the composition of the vapor

Physical characteristicstalhlorita is certainly very important, but equally important is also the fact that the decorative material has beneficial effects on human health.

experts proved that the thermal wavelength emitted by the heated stone is the length of the heat wave, coming from the man, and then, next to the stove, decorated with soapstone, you will be cozy and comfortable.Due to the mild heat increases immunity, improves blood circulation and reduces blood pressure.

Features finish sauna stoves Soapstone ↑

In fact, facing the oven Soapstone - the process is not complicated and does not require practically no casualties.Time to finish it will take a little bit, and the installation is simple to a disgrace.Although there are here and are subtleties and nuances.We talk about them.

What stone is ideal for stoves ↑

for lining furnaces and fireplaces use sanded tile soapstone thickness of about 40-50 mm and a width of 80-120 mm.The color of the material can be anything, as long as it was the same shade.

The furnace, lined with smooth tiles talkohloritovoy
talkohloritovaya smooth tiles in the finishing bath furnaces

How to lay a stone ↑

Depending on what you want to get to the exit, talkohlorid can be laid both vertically and horizontally.If you spend laying tiles vertically, ie the end, they will be much faster to warm up to the top, and if you put a flat material, the heat will not spread along the fibers, and across that slow down the process of heating.

Decorating the walls of the bath soapstone
Wall finishing baths soapstone - Unlimited number of options for horizontal, vertical, asymmetrical cladding
Horizontal tiling soapstone
horizontal tiling soapstone

Secrets stacking soapstone ↑

And they not, in fact to tile powers,only need to use a special glue that clever Finns invented in the last century.It is prepared from talkohloritnogo powder and liquid glass.This combination provides the necessary strength and durability.

Because the furnace for finishing tiled talkohloritovoy not used mortars, bathhouse your stay clean, because any dust or dirt during operation will not be.

When making furnaces soapstone is laid horizontally, as in this case, the stove will warm up faster, but for facing the stone being cut in the opposite direction (across the grain), because rapid heating will be combined with a uniform and slow heat transfer, ensuring your bathhouse heatfor the whole day.

Stacked tiles on one another, while they need to fix a special bracket or pin to its own weight, they have not fallen off.After drying, the adhesive solution (2-4 hours), staples are removed, and the gaps between the tiles are filled with grout.

Stove Soapstone - the dream of any attendant ↑

Bathhouse soapstone oven, capable of maintaining stable temperature and humidity in the steam room or sauna bath.It is this natural mineral to avoid such a problem, as the cold stone in the boiling water in a tank.Due to the large mass of soapstone around the stove and walls bath is heated much more evenly and the quality of the steam is much more soft and enveloping.

surface temperature of bath furnace of this material and warm, filling steam room are ideal for the initial warm-up of the human body.By accessing the bath, you will feel how deeply penetrates the body warm wave radiated from the stove.

Application of soapstone in the walls and oven: dismisses the very source of the heat and the area around it
Talkohlorit finishing in the oven and the wall
oven and adjacent wall is decorated with soapstone

Considering all the features of soapstone can draw only one conclusion - stove finished with this mineralIt will be a true masterpiece, a work of art, worthy of applause and admiration.Beauty, of course, save the world, and the heat, a gift from the stove, will save you from many health problems and depression.