Plastic pools - the types and methods of their device

By Admin | Garden And Buildings / Pool
17 April 2016

Fans of country life with each passing year becomes more and more.This is understandable: the fresh air, friendly gatherings, barbecues on the coals and, of course, rest with the home pond.Dream, and more!And if before the last item caused considerable difficulties in the implementation, because the swimming pool in the garden was considered a measure not only troublesome but also expensive, today plastic pools easily refute this assertion.

Content

Advantages and types of plastic pools ↑

Plastic Pool
finished a bowl of plastic - the speed of installation, ease of maintenance, operation without problems

Pools of plastic are recognized leaders in popularity.This is explained by the peculiarities of the material that helped them take first place on

the podium.About

pros plastic ↑

What explains such a fuss about tanks made of plastic?Let's deal together.

  • UV resistance.Pools to give plastic do not burn out, which is especially valuable when you install in an open area;
  • seamless design.The absence of joints significantly increases the level of security: a leaking pool will not be exact;
  • high chemical resistance and durability;
  • simple installation, fast commissioning;
  • resistance to temperature changes;
  • reasonable cost.Perhaps, this item will please many, because it provides an opportunity for a little money to create a piece of paradise with crystal clear lakes.

Polypropylene: the secret of success ↑

worth noting that, despite the abundance of plastic materials, polypropylene is recognized as the best.And all because he is, in addition to the above advantages, it has exceptional quality.


Polypropylene - an eco-friendly material, does not emit harmful substances into the water and did not come into contact with cleaning agents.

This is important!Polypropylene recommended by the Department of State Sanitary and Epidemiological Surveillance as the best material for the manufacture of swimming pools for children.Concerned about the health of beloved child?Polypropylene plastic swimming pool for children - this is the choice of caring parents.

High technology allows to produce polypropylene containers of any depth and shape.You can select a standard rectangular or cylindrical in shape, and order any other - there are no barriers of imagination.Colours, too, are varied: to convince you that the pool should not be blue one!

Polypropylene accept any form
Polypropylene accept any form

Polypropylene bowl has low thermal conductivity and, therefore, able to maintain long-term stability of temperature regime.This quality will save on the use of water heaters and heat-insulating materials considerable sum.
With the construction of pool of polypropylene there is no need for additional finishing.The surface is ideal: easy to clean, looks nice and does not slip.
List the advantages can be endless, but perhaps these arguments are enough to prefer a plastic swimming pool to give any other.

Species plastic pools ↑

Today, there are 2 types of plastic containers: monolithic and modular, the latter, in turn, are divided into the composite and frame.They differ
bowls: in monolithic structures used solid bowl and plastic prefabricated swimming pools consist of several components.Frame
collected by a mechanical coupling, and the elements of the composite are welded together pools.

This need to know!Prefabricated swimming pools have somewhat poorer aesthetic characteristics, so they are not in high demand relative to monolithic plastic basin.

Monolithic pools are made of polypropylene sheet, of a width of 6-15 mm.Thermal welding allows you to give them any shape and any size.

Install a plastic swimming pool with their hands ↑

Another advantage of plastic pools is that the installation does not require specialized knowledge.A little patience and useful information, and the pool will serve as a central element of the decoration of the landscape and place kids favorite games.

First you need to determine the location of the reservoir.Over a matter of choice that not everyone thinks, but in vain.

Expert Advice!Placing a plastic pool should be on a level surface, in the absence of gravel, sand, asphalt and roofing felts.If possible, position the pool away from the trees, ascrown will pollute the water and roots can damage the bottom.

numbers you need to know ↑

order to pool gave only positive emotions, and does not become a source of problems, it is worth considering some points.One of the main conditions - groundwater must be 20 cm below the bottom plate (at least).

Getting excavation, make sure that its size was 15 cm more than the pool.The depth of the pit is calculated from the amount of penetration and the thickness adjustment layer.The thickness is determined by the composition of the soil and equals:
- for gravel and sandy soils - 200 mm;
- for sandy and loamy soils - 250 mm.
If you decide to install a swimming pool directly on the ground, the amount of penetration, respectively, will be equal to 0.

sequence works for the installation of reservoirs ↑

With the predominance of sandy and loamy soils, characterized by poor bearing capacity needed strengthening.You can use one of the following:
1. soil compaction.
2. Construction of a dirt pad.

Plastic Pool: circuit device
plastic pool: diagram of the device

The second option - is preferable.At the bottom of the pit is placed a pillow, consisting of concrete and sand (sometimes gravel and sand).The optimum thickness - 50 mm.Screed mortar of cement and sand should be kneading, guided proportions: 3 parts sand, 1 part of cement and water 0.5.

After drying cushion (approximately 3 days), you can install the formwork.
bottom is reinforced around the loop, the height should be 200 mm.

This is important!For reinforcement used steel wire thickness of 12 mm to contact the cells of 25 cm.

The pillow of crushed stone and concrete screed for the future of the basin
pillow of crushed stone and concrete screed - a solid basis for being built swimming pools, a protection for the bottom of the design

for alignment (a few days) tothe bottom surface of the applied cement-sand screed layer of 20 mm.Then the finished slab of concrete stacked polystyrene thickness of 40-50 mm, set the bowl on top of the pool.Fill it with water should gradually.When filling should carefully monitor the level of liquid.For once, you can fill no more than 30 cm.

Plastic garden pool: Performance
plastic pool to testify: the results of

intervals between the cup and the side formwork is filled with cement and sand, pour water and tamped.The final stage - filling holes that are formed between the earth and formwork.

Expert Advice!Cases when wanting to save the townsfolk limited device sand pillows and foam formwork.However, ignoring the above-mentioned sequence and the absence of the cement framework leads to cracking.

work is completed, which means that soon you can go to the very pleasant - testing the newcomer pool, which, subject to technology, will be held on "Hurrah."Cheerful children's laughter and happy faces of his family to serve as the best confirmation and the most coveted reward for your work.