What better convector heater or oil - a comparison of the characteristics of

By Admin | Home Appliances
15 April 2016

is often used in everyday life such as heaters or oil, or convector.In general, the principle of heating the air masses have one (convection), but in each of the warm air heaters moves differently.Many before purchasing the device for heating the room wondering: what is best convector or oil heater.So let's weigh the pros and cons of each of these devices and try to make objective conclusions.

What better convector heater or oil - a comparison and selection of the best

Contents:

  1. Heaters oil type
  2. Heaters convector type
  3. convector and oil heater - a comparison reveals the clear leader
  4. features comparison table oil and covector heaters
  5. Video: convector heater or oil

oil heaters type

These devices are widely used to increase the temperature of air in an apartment or house.Installing them is very simple, it does not need any special skills and knowledge.Turn on the device in the socket, place it close to the heated place - ready.Due to the design as simple as breaking the ci

rcuit devices are unlikely.

Variety of oil radiators
Several models of oil radiators - far left is equipped with a fan.

At the core of the oil cooler is the reservoir of metal is poured into a mineral oil.The oil, in turn, is an element for heating.As a rule, this type of device is equipped with a rheostat for temperature control, a compartment for the power cord and electrical overheating protection.Sometimes there is a heater in the sensor that determines the deviation from the horizontal.This allows you to automatically turn off the unit overturned.Also in the oil cooler provides protection against splashes.

Handle to move around the room
Oil heaters are equipped with a handle for easy moving around the apartment.

Wheels to move around the room
heaters are equipped with castors.

Compartment for power cord
cord compartment designed for storing power cable inoperative.

oil Advantages of the device:

  • Low price;
  • Quiet operation;
  • ease of movement to different distances, for example, from room to room.

To determine which power unit is required for the room was warm, we use the following rule.If the ceiling height not exceeding three meters, then heating 10 square meters of space is needed radiator capacity of 1 kilowatt.Mainly produce similar devices with a power range from 1 to 2, 5 kW.

have usually a thermostat device which automatically sets the desired temperature, keeping it at the same level.Very comfortable models with timer - he turned on the heater at the appointed hour.For example, you can schedule the heating in the morning or in the evening for the arrival of all households to work.Thus, the timer can save a fair amount of power, which is now oh as expensive.

Electronic heater control
heater with electronic control system.

Heater with mechanical control system
mechanical control system.

Heaters convector type

from oil coolers are different hull shape - they have it is flat and smooth.It has a room thermostat, thanks to which the room is maintained the right temperature.

Convectors in classical performance
Simple convector heaters in the classic version.

Unlike oil heaters type having mostly outdoor performance, Convection radiators mostly are fixed on the walls.But there are floor models - usually they have wheels for mobility.

Brackets for hanging on the wall
convector having an attachment and can either be hung on a wall or mounted on wheels.

Baseboard convector type
baseboard convectors, height can be from 15 cm and a length of 1500 cm.

oil-type heaters radiate heat.In convectors heat radiation minimal - only from the front panel.And the air is heated by heat exchange of hot and cold air masses.Thus there is a constant movement of air along the surface of the heater.

convectors does not make noise, their work is based on a natural process - air convection.They quickly and evenly heated room.Mount the unit on the wall easily, and if you want you can set it on the floor.There Convection heaters for home and for office, commercial or industrial premises.

In Convection air moving device, moving at different altitudes.Hot more rarefied air flying up to the ceiling, and a heavy cold - tends down to the floor.If convection occurs correctly, there are constantly streams of air masses, the heating room.

The process of convection
So there is a moving air mass in the process of convection.

device consists of the following elements:

  • convection portion (the heater);
  • heating element embedded in the body.

Convector unassembled
convector heater with the front cover removed.

During the cold air coming into the convector is heated by the PETN.The air becomes lighter, rises and exits through upper louvers.Well, the place of the departed up the cool air of the room comes a new batch.

heated air has a temperature on the thermostat exposed.He then turns off the heating element comprises.The efficiency of this device is quite high.The slots are located on the front panel, designed for the hot air outlet.So he did not move straight up, and the heated floor and the walls, shutters for its output downwards.The air coming out at once, but they accumulate in and getting positive pressure.Thereafter, it goes out of the device in a horizontal direction.

Thermostat covector
convector heater thermostat.

Since the heating element is secured in a special way in the body, grounding will not have to worry.After Tan has no contact with the metal body - among them are the stops of a special heat-resistant plastic.A constructional unit is designed so that the heat is evenly distributed in the room.This ensures comfort and convenience.

For those who can not decide what to buy convector heater or oil, no harm will know about the merits of convector heaters:

  • These devices are fireproof and comply with European standards.
  • Such heaters placed in each room and combined into a single network, you can get a modular heating system.In the country or in a country cottage, he could well be used in place of the boiler, which is expensive and requires installation of multiple heating pipes,
  • Thanks to the electronic thermostat and the different operating modes can be very significantly save electricity.

Electronic control with timer
electronic control system and the on-off timer.

convector heater and oil - a comparison reveals the clear leader

So, compare the key indicators of the two most popular heaters.

1. economical use. oil cooler consumes a quarter more electricity than a convector.Since electricity rates are increasing, this fact may be decisive when choosing a device.

2. time warming up.Warming air oil heater goes through several stages: first electric heating element heats, then the heating element - the oil, and it, in turn, heats the edges of the body, donating warm air masses.It takes much time (and power, many standing) - the device has long been included, and still cold in the room.Fans can speed up the process, built-in oil heater.

Oil heater with fan
Heating oil-type with built-in electric fan.

have convector heating element directly heats the body, so its coefficient of efficiency is not less than 95 percent.However, the heating rate is also not so high and the oil cooler fitted with a fan, ceteris paribus likely outperform the convector.

3. comfort at work. This refers to the ease of carrying and mounting.It should be noted that in this regard convectors convenient and mobile.Their weight is not more than 10 kilograms, and the oil unit more bulky and heavy - their weight is between 18 and 25 kilograms.Convectors and trolley traveling more convenient and easy to fix to the wall, saving space in the apartment and facilitate cleaning.Furthermore, the temperature produced by the convector, more comfortable.It has fluctuations throughout the volume of the room.

4. Security. You understand that the hot oil - not the best neighbor.It heats the heater so as to burn close.Exceptions are heaters fitted with protective cover.

Oil cooler with protective cover
radiator with a protective casing to protect against burns, which can be accessed by touching the red-hot housing radiator.

But Convection unit can be called completely safe.It heats the whole body of up to 60 degrees, and at this temperature can not be burned.Equipped with a protection function, convector, left unattended, will not suit trick master.But the oil unit in any case can not be left alone with the room - because some of its models do not even have the overheating sensor.

5. Lifetime. Probably not one person had witnessed the outflow of oil from the oil heater.Sooner or later, there is a leak.First, there is a hairline crack on the body, and then through it begins to slowly evaporate the oil.Well, eventually the heater is out of order, and no one can repair it - is it possible to find a tiny microcracks.With regard to convector heaters, they are 10 and 15 years, although the term usually indicates the manufacturer's warranty of 5 years.

6. Environmentally friendly devices.To start take for granted that the dust in the room with the air movement during convection will rise forever.Therefore, traders are lying, telling about some features of the model convection heaters or oil, no raises dust.Now for the burning of oxygen.In convectors feature PETN material and the heating temperature of the housing such that the process is physically impossible.Some argue that oil radiators burning oxygen is possible.Do not believe it - it's not true.

None of the heater does not burn oxygen - Open burning them there!

7. cost of the device.There oil heaters getting ahead - the prices are significantly lower than in the heaters.But do not forget about value for money, that is to compare not only prices, but also the most important technical indicators (which were discussed above).

Comparative table of specifications oil heaters and covector

Options Oil heater convector heater
Cost -
Maloekonomichen.
+
economical approximately 25%.
heating time + -
Conventional models are heated for a long time, and equipped with fans quickly.
-
heats the room for a long time.
Comfort in use -
average.
+
more comfortable as the floor and wall models.
Safety -
Large surface temperature (but there are models with protective cover);in violation of the rules of operation there is a risk of explosion.
+
convector surface is not exposed to intense heat;can be left unattended.
Lifetime -
Middle
+
Big
Sustainability -
by convection raises dust particles
-
by convection raises dust particles

And all this together, deciding what to choose convector heater or oil, can clearly conclude that of course, the convector.Lightweight, compact, quiet and safe, these heating devices is gradually replacing the apartments and offices of the heavy short-lived devices filled with hot oil.So we can say that the oil heaters have become practically yesterday in space heating.The only thing that models equipped with oil heaters, fans are able to more quickly heat the room, but the process of heating the surface of the remaining debt.See below for details on the selection of materials data heaters.

Video: convector heater or oil

Additions
  • reviews convector heaters
  • Reviews of oil heaters

Add a question not received an answer to your question?It was not clear moments?
Ask our experts and visitors:

+ Add new question


Case material:
Dehumidifiers - technical specifications and properties
Benefits and harms of infrared heaters
Benefits andharmful infrared heaters to human health
How to choose the infrared heaters
How to choose the infrared heaters - the principle of operation, the device and the important selection criteria
How to choose a heater
How to choose the heater for the house or apartment - a form of comparison and selection criteria
How to choose a convection heater
How to choose a convection heater - a device selection criteria and rules of operation
How to choose a heater
Which heater to choose an apartment or house - the pros, cons and selection criteria
How to choose the oil heater
How to choose oil heater - the principlework selection parameters and error operation