Dimensions of aluminum radiators of different brands and models

By Admin | Heating And Heaters
14 April 2016

Aluminium today do a lot of useful things.That radiators alloy of the metal has taken root in our homes - beautiful, light, heats up quickly.However, when choosing a data heaters need to know and correctly choose the size of the aluminum radiators.Let's understand, what size are they and how to choose the right.

What are the dimensions of aluminum radiators

Contents:

  1. What you should know about the size of the radiators and what they do
  2. Dimensions aluminum radiators of different manufacturers and models
  3. How to calculate the number of sectionsRadiator

What you should know about the size of the radiators and what they do

first important dimension is the distance between the axles.The most common commercially available aluminum radiators with a distance between the upper and lower header 35 or 50 cm.

Between the axial distance
There are models that have this indicator - 80, 70, 60, 40 and 20 cm.

along the length of aluminum radiatorsare practically limited in length.The longer t

he radiator, the greater its capacity.To achieve the desired level of power take a certain number of sections.The total length of the radiator depends on the required capacity, the size of the section of aluminum radiators and power.

to dock with the radiator heating system pipes, use mounting kit.

It includes:

  • 1. Brackets (2 or 4 pieces) for a radiator hanging on the wall.
  • 2. Special valve to vent excess air (bleed screw).
  • 3. The key is to tap
  • 4. Radiator communicating tubes, having a diameter of 3/4 or 1/2.They may be left or right type.
  • 5. Radiator cap (blind plug).
  • 6. sometimes even dowels for mounting brackets.

Mounting Kit
kit for aluminum radiators.

By type radiator manufacturing aluminum alloy can be cast or extrusion.

1. casting makes the device more durable and reliable.In this case, section represent a cast entirely separate parts, which are collected in a single radiator.The lower part of the battery is welded at the end.

2. The use of extrusion equipment involves punching through aluminum alloy heated metal plate with holes - die.This allows you to get a long aluminum profile of the desired shape.After cooling, it must be chopped into segments corresponding to the size of the radiator.Then welded upper and lower portions.In this case, adjust the radiator for longer is not possible, the section does not take away from it is not added.On sale they occur rarely but still they are there.

Dimensions aluminum radiators of different manufacturers and models

The following table shows the size of the section aluminum radiator and radiator assembly sizes.

Aluminium radiators ROVALL

Rovall

this company, part of the Group Sira Group, makes aluminum radiators with a distance between the collectors 50, 20 and 35 cm. The kit for mounting (purchased separately) must include adapters, plugs,nipple pads (for connecting sections), wall mounting brackets and bleed screw.

Country of origin: Italy.

Basic parameters:

  • limit operating pressure - 20 bar.
  • Test pressure device - 37.5 bar.
  • limit water temperature - 110 ° C.

Features Rovall Alux 200 - distance between axles 200 mm:

Model Dimensions (W / H / D) mm power all radiator W number of sections
ALUX 200/ 1 245/100/80 92 1
ALUX 200/4 245/100/320 368 4
ALUX 200/6 245/100 /480 552 6
ALUX 200/8 245/100/640 736 8
ALUX 200/10 245/100/800 920 10
ALUX 200/12 245/100/960 1104 12
ALUX 200/14 245/100/1120 1288 14
ALUX 200/16 245/100/1280 1472 16

* All data taken from official sources manufacturers.

Features Rovall Alux 350 - distance between axles 350 mm:

Model Dimensions (W / H / D) mm power all radiator W number of sections
ALUX 350/ 1 395/100/138 80 1
ALUX 350/44 395/100/320 552 4
ALUX 350/6 395/100 /480 828 6
ALUX 350/8 395/100/640 1104 8
ALUX 350/10 395/100/800 1380 10
ALUX 350/12 395/100/960 1656 12
ALUX 350/14 395/100/1120 1936 14
ALUX 350/16 395/100/1280 2208 16

* All data taken from official sources manufacturers.

Features Rovall Alux 500 - distance between axles 500 mm:

Model Dimensions (W / H / D) mm power all radiator W number of sections
ALUX 500/1 545 x 100 x 80 179 1
ALUX 500/4 545 x 100 x 320 716 4
ALUX 500/6 x 545100 x 480 resolution 1074 6
ALUX 500/8 545 x 100 x 640 1432 8
ALUX 500/10 545 x 100 x 800 1790 10
ALUX 500/12 545 x 100 x 960 2148 12
ALUX 500/14 545 x 100 x 1120 2506 14
ALUX 500 /16 545 x 100 1280 x 284 16

* All data taken from official sources manufacturers.

Aluminium radiators Climatic Control Corporation LLP

BiLUX AL

brainchild of the company - radiators BiLUX AL with excellent heat output, are made taking into account all the nuances of individual heating systems.Their surface area is very large, and the cross section of the riser pipe is designed optimally.Plant for the production of these radiators in China.The distance between the axes of the collectors can be 30 cm (BiLUX AL M 300) or 50 cm (BiLUX AL M 500).

During manufacturing diecast parts are connected with the upper bottom, which is made by a special welding technique.After assembly of the battery are processed by chemical and mechanical means.Then they are tested by checking whether they are tight and durable.Paint battery in several stages.After purification affect them electrostatic field.At this time, the enamel is deposited on the epoxy resin.Then, heating to a high temperature, the surface of the product is polymerized.

ends of radiators BiLUX AL have a special design that allows use as a special ring gaskets.The material from which it is made, one hundred percent seal joints.Nipples are thus used cadmium.Leaks are absolutely excluded.How many times have not got over sections of the battery, do it as simply as possible.

Country of origin: United Kingdom

Basic parameters:

  • limit working pressure - 16 bar.
  • limit test pressure - 24 bar.
  • pressure that can break the battery - 48 bar.

Features BiLUX AL:

Model Distance between axes, mm Dimensions (W / H / D) mm power all radiator W number of sections
BiLUX ALM 500 500 570 / 75-80 / 75 180 1
BiLUX AL M 300 300 370 / 75-80 / 75 128 1

* All data taken from official sources manufacturers.

company Aluminium radiators Fondital

Calidor Super

the company produced radiators Calidor Super.They are adapted to the Russian climate, as well as CIS countries.The production takes into account not only the European standard EN 442, but Russia - GOST R RU.9001.5.1.9009.Method of manufacture - molding at high pressure.Painting takes place in two stages.First applied to the protective layer of enamel using anaphoresis, and then give the enamel powder beauty products.Mounting kit sold separately.It bleed screw, blind plugs, adapters and brackets.

Country of origin: Italy.

Distance between axes:

  • 35 cm - Model S4, having a depth of 9.7 cm section and four side edges.
  • 50 cm - the model S4 (with four edges and a depth of 9.7 cm), and the lighter model S3 (with three ribs and a depth of 9.6 cm).

Basic parameters:

  • limit working pressure - 16 bar.
  • limit pressure on the gap - 60 bar.The test pressure of 24 bar are conducted at each stage of manufacture.
  • limit water temperature - 120 ° C.

Features radiators Calidor Super 350 S4 - center distance of 350 mm, the section has a depth of 96 mm.and 4 lateral fins:

Model Dimensions (W / H / D) mm radiator Power total W number of sections
Calidor S 350/1 428/96 /80 145 1
Calidor S 350/4 428/96/320 582 4
Calidor S 350/5 428/96/400 727 5
Calidor S 350/6 428/96/480 873 6
Calidor S 350/7 428/96/560 1018 7
CalidorS 350/8 428/96/640 1163 8
Calidor S 350/9 428/96/720 1309 9
Calidor S 350/10 428/96/800 1454 10
Calidor S 350/11 428/96/880 1600 11
Calidor S 350/12 428/96/960 1745 12
Calidor S 350/13 428/96/1040 1891 13
Calidor S 350/14 428/96/1120 2036 14

* All data taken from official sources manufacturers.

dimensions and characteristics Calidor Super 500 S4 - center distance of 500 mm, the section has four side edges and a depth of 96 mm:

Model Dimensions (W / H / D) mm power all radiatorW number of sections
Calidor S 500/1 578/96/80 192 1
Calidor S 500/4 578/96/320 770 4
Calidor S 500/5 578/96/400 962 5
Calidor S 500/6 578/96/480 1155 6
Calidor S 500/ 7 578/96/560 1347 7
Calidor S 500/8 578/96/640 1539 8
Calidor S 500/9 578 /96/720 1732 9
Calidor S 500/10 578/96/800 1924 10
Calidor S 500/11 578/96/880 2117 11
Calidor S 500/12 578/96/960 2309 12
Calidor S 500/13 578/96/1040 2502 13
Calidor S 500/14 578/96/1120 2694 14

* All data taken from official sources manufacturers.

dimensions and characteristics Calidor Super 500 S3 - center distance of 500 mm.and a section has three lateral edges and a depth of 100 mm:

Model Dimensions (W / H / D) mm radiator Power total W number of sections
Calidor S 500/1 578/100/178 80 1
Calidor S 500/4 578/100/320 712 4
Calidor S 500/5 578/100 /400 890 5
Calidor S 500/6 578/100/480 1068 6
Calidor S 500/7 578/100/560 1246 7
Calidor S 500/8 578/100/640 1424 8
Calidor S 500/9 578/100/720 1602 9
CalidorS 500/10 578/100/800 1780 10
Calidor S 500/11 578/100/880 1958 11
Calidor S 500/12 578/100/960 2136 12
Calidor S 500/13 578/100/1040 2314 13
Calidor S 500/14 578/100/1120 2478 14

* All data taken from official sources manufacturers.

Aluminium radiators Faral SpA company

FARAL

This company makes specially for Russia particularly strong radiator FARAL Green HP, which kept 16 bar working pressure.They are produced by injection.Both inside and outside they are coated with a layer of zirconia, which penetrates deeply into the surface of aluminum and is not washed off.Therefore, the evolution of gas on contact with water, the battery does not occur.Electrochemical corrosion is excluded.

depth batteries FARAL Green HP - 8 cm, FARAL Trio HP - 9,5 cm. A distance between the axes of the reservoir - 35 or 50 cm. The separately sold mounting kit includes a standard valve for venting, with plugs and adaptersbrackets, gaskets and screws with silicone plugs.

Country of origin: Italy.

Basic parameters:

  • limit working pressure - 16 bar.
  • limit test pressure - 24 bar.
  • limit water temperature - 110 ° C.

dimensions and characteristics of the radiator FARAL Green HP 350 - distance between axles 350 mm:

Model Dimensions (W / H / D) mm power all radiator W number of sections
FARAL Green HP 350/1 430/80/80 134 1
FARAL Green HP 350/4 430/80/320 544 4
FARAL GreenHP 350/6 430/80/480 816 6
FARAL Green HP 350/8 430/80/640 1088 8
FARAL Green HP 350/10 430/80/800 1360 10
FARAL Green HP 350/12 430/80/960 1632 12
FARAL Green HP 350/14 430 /80/1120 1904 14

* All data taken from official sources manufacturers.

dimensions and characteristics of the radiator FARAL Green HP 500 - distance between axles 500 mm:

Model Dimensions (W / H / D) mm power all radiator W number of sections
FARAL Green HP 500/1 580/80/80 180 1
FARAL Green HP 500/4 580/80/320 720 4
FARALGreen HP 500/5 580/80/400 900 5
FARAL Green HP 500/6 580/80/480 1080 6
FARAL Green HP 500 /7 580/80/560 1260 7
FARAL Green HP 500/8 580/80/640 1440 8
FARAL Green HP 500/10 580It was not clear moments?