Specifications radiators Kermit varieties and dignity

By Admin | Heating And Heaters
12 April 2016

stylish and modern radiators Kermi specifications are not worse than the exterior design.One efficiency of 97% speaks for itself.And all this is because in these convection heaters successfully combined with radiation heat radiation.This radiator will be appropriate in any environment - and trendy and classic.A German quality (these radiators are made in Germany) does not require additional advertising.But the purpose of this article is not an advertisement, and providing performance data heaters.

Specifications radiators Kermi

Contents:

  1. panel steel radiators KERMI ThermX2
  2. Steel tubular design radiators Kermi

Radiators Kermi is a steel panel and tubular radiators withall the attendant advantages and disadvantages.

steel panel radiators KERMI ThermX2

Made with all European standards, they have a wavy profile surfaces differing low price.They are suitable only for closed heating system.Small amount of hot water, combined with a high heat output make the

se devices best suited for autonomous heating.It is better to use them in systems where the coolant is not too hot.

These radiators are made using the latest patented technology X2, it will significantly increase the efficiency of heating appliances.Twice strengthening infrared radiation, this technology has made radiators are very comfortable.It accelerated heating time by about a quarter, as the economy grew by 11%.X2 Sense principle consists in that the front panel is heated first, and only after that - the rear.For more information, refer to the below presented.

Video: Technical features of steel panel radiators Kermi

After connecting the panels in a finished product, first carefully degreased, then it phosphating.Finishing occurs by electrostatic painting.The top coat is treated at a temperature of 180 degrees.Because of this it turns solid.Cast gloss finish gives the batteries elegant look.

top and side radiator grille has a screen.They allow to achieve a significant increase in heat transfer efficiency - 60%.Included are 4 plates are used to mount the equipment.

There are 2 line panel radiators Kermi, which differ in the place of connection to the heating network.On the side of the line connecting radiators Kermi ThermX2 Profil-K (FKO).But such devices as Kermi ThermX2 Profil-V (FKV or FTV), designed to connect the bottom.

Plug side Kermi ThermX2 Profil-K

These convectors are equipped with radiators, and panel they are made of two steel sheets profiled type, connected by welding.On the sides are the screens, and the top - bill-type lattice "grill".Marked radiators with lateral connection type combination of letters FKO.For connection to the system on the sides of the device at the Kermi Profil-K FKO has four pipe having an internal thread (1/2 "). Connect the radiator to the pipe can be on either side.

Specifications radiators Kermi ThermX2 FKO:

  • Connecting threads: 4 x G1 / 2 "(Int.)
  • Height: 300, 400, 500, 600, 900
  • Wheelbase: total height minus 50 mm
  • length from 400mm to 3000mm
  • Depth:type 10 and 11 - 61mm type 12 - 64mm, the type of 22 - 100mm, the type of 33 - 155mm
  • Operating pressure - 10 atm. (1.0 MPa)
  • test pressure - 13 atm. (1.3 MPa)
  • Max. flow temperature: 110 ° C
  • Operating temperature - 95 °

Plug bottom Kermi ThermX2 Profil-V

These radiators have a thermostatic valve built into the design.His right-hand thread, with a pitch M30h1,5.Temperature controller is not supplied, it must be purchased separately.Carving from the outer tube, its diameter - 3/4 ". Centre distance of 5 cm. This arrangement is designed for two-pipe heating systems. If you need to connect to the pipe system, you acquire special fittings.

Specifications Kermi ThermX2 FKV:

  • Connecting thread: 2 x G3 / 4 "(male.),
  • height radiators: 300, 400, 500, 600, 900
  • length of radiators: from 400mm to 3000mm
  • distance between the inlet pipe: 50mm
  • The depth of the radiator: type 10 and 11 - 61mm type 12 - 64mm, the type of 22 - 100mm, the type of 33 - 155mm
  • Operating pressure - 10 atm. (1.0 MPa)
  • test pressure - 13 atm. (1.3MPa)
  • maximum flow temperature: 110 ° C
  • Operating temperature - 95 ° C

ways to connect Besides panel radiators differ in type.Total Kermi produces 5 types of steel panel radiators:

Type 10 - single-row, has a depth of 6.1 cm. Lining and convector absent.It is manufactured by reservation only.

Type 10

Type 11 - single-row, lined, depth - 6.1 cm. There is one convector.

Type 11

Type 21 - two-row, lined, with a depth of 6.4 cm. A convector.

Type 21

Type 22 - two-row, lined.Two convector.

Type 22

Type 33 - three-row, lined.Three convector.

Type 33

most popular and commonly used type is 22.

Steel tubular design radiators Kermi

Besides panel radiators, Kermit and produces tubular steel radiators, different sizes and design versions.

These devices not only effectively warm the room, but also serve as a wonderful decoration of it.German design radiators are able to satisfy the most discerning buyer.We use them mainly for heating bathrooms, replacing them unpretentious towel.

beautifully twisted steel tubes going in horizontal and vertical directions, is a spectacle that is pleasant to the eye.In all of this they are also very durable - because when connecting pipes to each other by laser welding is used.There are two types of these heaters:

  • water radiators type - have a working pressure up to 10 atmospheres, and test pressure - 13 atmospheres.Thermal power range from 0.01 to 2 kilowatts.The most efficient models can provide heating premises up to 20 m2.
  • radiators electric type - convenient in that they do not need to connect anything to radically change in the heating system.No fuss with pipes will not be superfluous, nor with the installation and connection to hot water.And in the summer, when warm water shut off for sure, this electric radiator can help out.And now look at their basic model.

Kermi Ideos

Kermi Ideos - refined and elegant, impressive interesting stellar form.The individual elements are harmoniously interwoven with each other, creating a single image, gentle and air.At the same time the heat sink are of the highest quality.

Ideos

Dimensions:

  • Height: for valve performance: 758, 1133, 1508, 1883 mm;for the standard version: 776, 1151, 1526, 1901 mm.
  • Length: 508 and 758 mm.
  • Depth: 35 mm.

Kermi Fedon

Kermi Fedon - comfortable and original.Everything in it is done for the comfort of use.Temperature controller located below, easy to operate, and all the joints are hidden out of sight.

Fedon

Dimensions:

  • Depth: 50 mm.
  • height: 1048, 1648, 1948 mm.
  • Length: 510 and 691 mm.

Kermi Credo-Swing

Kermi Credo-Swing - distinguished by an interesting design of pipes - the cross section of a triangular shape.Their lungs and smooth curves look great.Design can be a standard, and with a valve.There is a nice bonus in the form of folding towel warmer.

Credo-Swing

Dimensions:

  • Height: standard version - 878, 1294, 1838 mm.and a variant with a valve - 987, 1403, 1947 mm.
  • length 455, 601, 746 mm.
  • depth 104, 105, 102 mm.

Kermi Credo-Duo

Kermi Credo-Duo - simple, modern, to keep pace with the twenty-first century.It has excellent heat dissipation.

Credo-Duo

Dimensions:

  • height: 1091, 1471, 1889 mm.
  • Length: 471, 621, 771 mm.
  • Depth: 81 mm.

Kermi Credo-Half

Kermi Credo-Half - screen fashion form shines not only beauty, but also functionality.Use it - a pleasure.Turned pipes running in the transverse direction, in harmony with the screen.Reinforce these pipes cute struts that make the product stable.All the elements are combined into a single block, the side made a break.

Credo-Half

Dimensions:

  • Length: 460, 610 mm.
  • Height: 1086 1466 1884 mm.
  • depth: 51 mm.

Kermi Credo-Twist

Kermi Credo-Twist - is like a valve, and without it.This battery features a beautiful shape in the form of an oval.The cross section of thin tubes with a beautiful bend - round.

Credo-Twist

Dimensions:

  • Height: standard version - 846, 1230, 1854 mm.and a variant with a valve 955, 1339, 1963 mm.
  • length of 447, 594, 740 mm.
  • depth of 96, 97, 95 mm.

Kermi Karotherm

Kermi Karotherm - fascinates her perfectly symmetrical forms.You can look at the infinitely perfect squares, enclosed in a large square outline.

Karotherm

Dimensions:

  • Depth: 22 mm.
  • Height: 300 - 2500 mm.
  • Length: 300 - 2500 mm.

Kermi Jive

Easy and dynamic model Kermi Jive not different symmetrical shapes.And this is its peculiar charm.Despite the seemingly ephemeral, the heat of it abound.

Jive

Dimensions:

  • Depth: 140 mm.
  • height: 1500, 1800 mm.
  • Length: 500 to 600 mm.

Kermi Icaro

Kermi Icaro - one of the new developments.It is somewhat similar to the previous, Kermi Jive.Most likely, the same asymmetry, lightness and expressiveness.

Icaro

Dimensions:

  • Depth: 58 mm.
  • height 1446 1866 mm.
  • Length: 400 to 600 mm.

Kermi Credo

Kermi Credo - straight lines, strict design and the lack of frills.Transverse tube works fine cross flat plate collectors.

Credo

Dimensions:

  • Height: for the standard version: 1094, 1474, 1892 mm, for valve versions: 1091, 1471, 1889 mm.
  • Length: 471, 621, 771 mm.
  • Depth: 35 mm.

Kermi Credo-Uno

Kermi Credo-Uno - perfect for any bathroom.Fashionable design and strict lines make this cutting-edge battery.

Credo-Uno

Dimensions:

  • Height: 789, 1169, 1473, 1777 mm.
  • Length: 490, 640, 790 mm.
  • Depth: 41 mm.

Kermi Basic 50

Kermi Basic 50 - without a single weld has an amazing quality, beautiful finishes.Lines form a clear look stylish and pipes are located at such a distance that the towels to dry extremely convenient.

Basic 50

Dimensions:

Basic 50 (direct execution)

  • Overall height: 804, 1172, 1448, 1770 mm.
  • Overall length: 450, 524, 599, 749 mm.
  • Mounting depth: 35 mm.

Basic 50-R (curved execution)

  • Overall height: 804, 1172, 1448, 1770 mm.
  • Overall length: 450, 599, 749 mm.
  • Mounting depth: 51, 60, 70 mm.

Kermi B24

Kermi B24 - has a D-shaped.The cross tubes have a smooth and gentle bend.It is also convenient to dry the towels - the distance between the tubes is chosen is just perfect for that.

B24

Dimensions:

B24-S (straight version)

  • Overall height: 805, 1173, 1495, 1771 mm.
  • Overall length: 440, 490, 540, 590, 740 mm.
  • Mounting depth: 32 mm.

B24-R (curved execution)

  • Overall height: 805, 1173, 1495, 1771 mm.
  • Overall length: 440, 490, 540, 590, 740 mm.
  • Mounting depth: 49, 55, 53, 68 mm.

Models Kermi Decor

1. Kermi Decor-V - consists of round tubes.It is fully ready for use - the factory already set the power level, and gate valves built.

Decor-V

Dimensions:

  • Width 1 section 46 mm
  • possible number of sections 4, 6, 8, 10, 14, 16, 18, 20, 22, 26, 30, 34, 40,44, 50, 56, 64.
  • Mounting height - 200 - 2000

2. Kermi Decor-S - also made of round tubes.But the design of this battery is amazing.Perhaps, he is able to lead to the admiration of even the most sophisticated consumers with a delicate taste.

Decor-S

Dimensions:

  • Width 1 section 46 mm
  • possible number of sections 4, 6, 8, 10, 14, 16, 18, 20, 22, 26, 30, 34,40, 44, 50, 56, 64.
  • Mounting height - 200 - 2000

3. Kermi Decor-D - good because when it replaced the old batteries are not required, "dancing with a tambourine."After all, she had the distance between the pipes is ideal for batteries DIN.

Decor-D

Table comparative characteristics Kermi Decor-D

Mark DD010 DD021 DD032 DD031 DD042 DD041 DD052
Appearance decorv2 decorv3 decorv4 decorv5 decorv6 decorv7 decorv8
Mounting height mm 238, 388, 538 and 938
Mounting length mm 276 - 2944 184 -2944 184 - 2944 184 - 2944 184 - 2944 184 - 2944 184 - 2944
Mounting depth mm 32 85 139 129 183 173 227
Mark DD010 DD021 DD032 DD031 DD042 DD041 DD052
distance between the bushes / mounting heightmm Power separate section
200/238 13,70 22,20 30,70 30,90 39,70 40,21 48,7
350/388 19,60 33,80 47,20 46,60 60,0 60,8 72,6
500/538 25,30 44,90 63,0 61,40 79,4 79,3 95,2
900/938 40,90 73,30 103,0 98,90 128,0 126,0 152,0

Well, as much detail as possible the characteristics of radiators Kermi favorite model can be found in the passport.

Additions
  • Reviews of steel heating radiators Kermi

Add a question not received an answer to your question?It was not clear moments?
Ask our experts and visitors:

+ Add new question


Case material:
Steel panel radiators
panel steel radiators - what better use for the heating system
Specifications steel radiators
Specifications steel radiators
What better radiators
What radiators are best suited for private homes