Where to begin repairs in the bathroom - the competent organization of repair works

By Admin | Construction & Tips
17 April 2016

Bathroom is one of the special rooms in your home, and to repair it should be treated with special care.It was here in large numbers and often the water flowing in this room there are large variations in temperature and humidity.For a correct and rational organization of the finishing work should firmly know where to begin repairs in the bathroom and have an understanding of the sequence of repairs.

Where to start repair in the bathroom

Contents:

  1. determines the type of repair
  2. together a plan of repairs and determine the future design
  3. Video: Modern design and planning of the bathroom
  4. selection and acquisition of new equipment and finishingMaterials
  5. Dismantling of old building materials and plumbing
  6. Laying pipes, wiring and other communications
  7. Alignment walls, ceiling and floor
  8. finishing facing materials
  9. Installing plumbing fixtures
  10. Installation accessories and entrance doors
  11. Video: Recommendations for repairand savings o
    n renovating a bathroom

determines the type of repair

Repair work may be in the bathroom:

unplanned. need for spontaneous repair can occur if an unexpected situation (pipe break or you flooded the neighbors).If you decide to replace a bath, it can result in sudden and repair (replace sewer pipes, the installation of the other plumbing, updated tile and so on.);

planned repairs. complexity and material costs can be planned capital repair or cosmetic.Sure, cosmetic repairs are cheaper, but such work can be carried out only in the absence of fungus and health running water and plumbing.Such repair involves the replacement of wall and ceiling coverings, updated flooring and faucets.A more serious repairs, even if not very heavy, requires thorough preparation and a serious approach.

together a plan of repairs and determine the future design

doing repairs in the bathroom with their hands and wondering where to start, you must first decide on the future design of the room.Imagine what would you like to see your bathroom, decide with color.The traditional colors for this room are pastels, or a combination of two colors (eg blue and dark blue or peach and beige).

Then you need to decide what materials will be used for decoration.To finish the bathroom often use:

  • tiles;
  • Porcelain;
  • Mosaic;
  • plastic panels.

Carefully inspect your plumbing, and if necessary, decide to replace the outdated version of plumbing fixtures.

With a tape measure the height, width and length of the room, calculate its area.Determine where they will be located sanitary devices, in fact change anything after the repair is unlikely to succeed.

Video: Modern design and planning of the bathroom

selection and acquisition of new equipment and finishing materials

Having decided on their own to carry out repairs in his bathroom, many owners think, where it begin repairs in the bathroom and go to choosenew sanitary equipment and finishing materials.Of course, this phase of repair is very important, but it must be followed only after you have fully decided on the design, a view of a new plumbing, and the number of necessary finishing materials.

Before buying plumbing fixtures required to verify their size and check if they suit your bathroom.

Acquire finishing materials and tools are better at one store, where a wholesale purchase offers also good discount.Buy everything you need right in full, so you do not waste time and do not run around in search of the missing material.

Dismantling of old building materials and plumbing

Next, you should prepare the room directly to the repair work.Sink and bath better dismantled during repair, even if you do not intend to change them.
Then you need to remove the old tiled covering, to clean the ceiling, walls and floor.If the walls of the bathroom were painted with paint, then it must be removed completely.After the adhesive mixture or a new coat of paint on an old coat will not stick.

Removing tile
Removing the old tiles. Photo - tamabau.de

Laying pipes, wiring and other communications

dismantle the old paint, you can begin to replace the pipe.In older homes should be changed in addition to the pipes, which are directly in the bathroom, and the main riser (in the case of combined bathroom);and in some cases even water pipe between the floors.As the old pipe can leak, which is fraught with a new unplanned repairs and new costs.

At this stage of repairs and wiring should be replaced.Determine where the appliances will stand and move the required number of outlets, change the wire and switch.

Do not forget to take care of the repair and installation of ventilation, it is very important for a bath.It is best if ventilation is compulsory.In today's market there are many different options for organizing the fan forced ventilation.

Alignment walls, ceiling and floor

scale and nature of these activities depends on the surfaces.If the walls are not very smooth, it will have to do their alignment with the help of plaster.At sufficiently smooth walls and the ceiling is not necessary to use a thick layer of material, and in some cases can be dispensed spackling.If the surface is necessary to align the lot, the repair may be delayed.

Alignment walls
Align wall spackling. Photo - www.filippo.nl

finishing facing materials

Now we can start finishing walls and ceilings: painted, laid tile, covering selected mixtures, etc..

Magnificent option could be coated with emulsion paint the ceiling: ceiling looks verybeautiful, it does not accumulate moisture, and can choose any color.A more practical alternative may be the installation of plastic panels or suspended ceiling.

If you install the bath screen is closed, the floor beneath it can not lay tiles, in order to save material.

Installing plumbing fixtures

Sanitary appliances are installed after completion of all the finishing works, so as not to damage the new (old) plumbing in the process of repair and to ensure unhindered access to the surfaces of the room, requiring finish.

Mounting sinks
mounting shell. Photo - contentfreelance.com

Installation accessories and entrance doors

At the final stage of repair in the bathroom is placed furniture and fittings (hooks, mirrors, lamps, etc.).Also, only now it is replacing the door.Change the door before it is not necessary: ​​they can be easily damaged during the repair process, raising and setting the plumbing.

Now you know how to begin repairs in the bathroom, and in what sequence to perform the work.So easy to cope with this complex, and an updated bathroom will delight you with their brilliance and impeccable appearance.

Video: Guidelines for repair and savings on renovating a bathroom


Add a question not received an answer to your question?It was not clear moments?
Ask our experts and visitors:

+ Add new question


Case material:
What better to do the ceiling in the bathroom
What ceiling is better to make the bathroom - advice on choice of finishes
Is it better to build a private house or flat
What is better for a private house or flat depending on the needs, preferences and capabilities
Decorating the bathroom
Decorating the bathroom PVC panels - preparation and step by step installation
How to calculate the area of ​​a room
How to calculate the area of ​​a room - formulas and calculation methods
How to start a kitchen renovation
Where to begin renovation of the kitchen with his hands and make it as soon as possible
Renovated apartment
sequence of repair of an apartment - a guide to action
Where to start repair of apartments
Where to start repair apartments and finish itas soon as possible