Superbyudzhetny toilet reed

By Admin | Building
02 June 2016

As a result, the overall creative efforts - both adults and children, at their summer cottage was built a unique and unique structure - a toilet made of reeds.


materials for construction - such as the toilet, was bought by a rope and a few dozen screws.All this cost -!The remaining materials are not spent one penny.

Materials used:

  • nylon cord,
  • screws,
  • reeds,
  • old nails,
  • iron sheet from the burned barn,
  • old board,
  • fallen trees in the forest,
  • old windowsframe with hinges,
  • cover from the old toilet,

Design features

is prepared pit toilets.The lower part of the support shafts (small tree trunks) and burn the carcass digged into the ground forming a kind of tent.The resulting extra tent fastened horizontally arranged plate, branches.The toilet floor slightly elevated above the ground, the door frame (frame of the old window) covered with windproof film and intertwined wicker, door handles made of twigs.Within a few shelves, on which bunches of herbs, flowers and toi

let paper stand.

Technology laying cane

bulrush better stock up on winter, tying in snopiki.Before use, cut off the top, otherwise they fall off, and will be a lot of dust.Snopiki sutured in place, two lines with "sewing machine".

sheaf stacked in rows, rows - upwards.Each row is sewn with two stitches.One line at half sheaf, so as to follow a series of closed it, the second line is closer to the top of the sheaf.

«Sewing machine with ADF material»

For sewing a sewing machine you need at least two or three people, but the more, the better.

Needle - thick wire thickness of 4-5 mm, at the end of the needle make a circle (a needle) and other "sharp end" of the needle has a view of the handle is perpendicular to the needle, like a corkscrew.

One person inside the toilet, holding a needle and a ball of caproic rope - a top bobbin.

The second man from the outside, only a tangle of rope - it will hook and lower bobbin.

third party, inside the toilet, keeps the hook from a wire will pull the thread.This is the upper tensioner.

Fourth, outside, holding a small fanerku - will automatic feeder material.

Initial state:

Dressed upper bobbin thread a needle, the free end of the string and fixed.End
lower thread is fixed in the same place.

Duty Cycle:

  1. Feeder sets sheaf in the right place, relying on its base fanerku to rush not slide down and was smooth.Signal complete installation, "he!"
  2. top node pushes the needle to thread through the sheaf vdet to the desired depth.Signal: "op"!
  3. shuttle pushes your ball of the lower thread in a loop back "needle", and makes a small stretch.Signal "Ouch!"
  4. At the signal "ti-i-ss" The needle is pulled back, pulling the lower thread tightened.The upper thread tensioner performs stretch and stick ready to stitch, so as not to dissolve it.

Then the whole cycle is repeated:

it!- Op!- Ouch!- Five-and-ss!
it!- Op!- Ouch!- Five-and-ss!
it!- Op!- Ouch!- Five-and-ss!

Make sure that the connection of the upper and lower thread was about the middle of the thickness of the material sewn.

And finally set cement from the metal sheet.

Tips and tricks:

  • For safety reasons all participants need to issue a glove!Reed is pricked and a rope can cut your hands.
  • Do not pull the stitches too far or later may break monofilament thread.
  • With rushes over the entrance to the toilet you can build the original "hair" trimming his clippers to the desired shape.
  • To lubricate the sewing machine promptly serve drinks.

specially constructed object

  • He does not get wet;
  • warm enough;
  • Easy to use;
  • original appearance.


  • fire hazard, but is partially remedied.Reed can be treated with fire retardant.
  • lack of ventilation.

need to install the ventilation pipe weaving.It must be set up and the seat of the display through the roof.The upper part of the pipe is better to paint in black color to increase traction.

three or four hours of effort and common toilet is ready!

Build with pleasure!Good luck to all!

Posted forum participant lt654
Editor: Roman Adamov