This article is intended for homeowners who are preparing for winter.In it you will find advice, not only for the prevention of heat loss, but also a more uniform temperature throughout the house.
Signs of low levels of insulation in the house:
- cold wall;
- Cold floors;
- uneven temperatures around the house;
- Large heating costs;
The first thing you should do for insulating your home is to determine the level of tightness.And since warm air tends to rise, it is important to check the tightness in the attic or loft.Sealing attic rather expensive, but the attic is sealed with a high level of thermal insulation can save a significant amount of money.
main practical way to determine the level of integrity of the attic is the presence or absence of the ceiling beams.Availability ceiling beams usually means a low level of tightness.By counting the number of required thermal insulation material, when purchasing be sure to pay attention to the coefficient of heat transfer resistance.The higher the rati
Fiberglass rolls enveloping insulation Loose-fill insulation, and it is frequently used materials for thermal insulation in the attic (attic).When you install insulation materials, remember the following:
- Loose-fill insulation is the most effective form of insulation, but it is difficult to establish .You will have to hire professionals to install.In contrast to the filling of heat insulation, fiberglass insulation rolls and enveloping easy to install and you do not have to hire anyone.Most homes have a fiberglass cover material thickness of 7-15 cm, which in the American system measures the coefficient of heat transfer resistance value is equal to 9-19 (R-value)
- When installing insulation materials, try not to touch the holes for the spotlight.
- Check lighting fittings and interior walls of the upper corners for leakage of warm air;you must make sure that the internal warm and moist air does not penetrate into the cold attic, increasing the risk of condensation and mold.
- Just check the level of insulation in the walls, canals and semi-basement.
Types of thermal insulation for the basement
Internal insulation for foundation walls can be installed only on the dry base.When the foundation is ready, enveloping insulation can be used in wall recesses pillars, walls and ceilings;or you can use extruded polystyrene thermal insulation for wall upholstery.
If the foundation is not ready, you can use fiberglass rolls of polyethylene-coated wall.Although the thermal insulation of walls adjacent to the foundation will prevent the penetration of cold and help reduce heating costs, it has some uncomfortable.
First, any moisture which penetrates through the wall, can cause condensation.Secondly, because of the moisture barrier in the foundation wall hinder the process of drying out the walls.
And finally, never install insulation materials, when the foundation is still wet;start installation insulation, after making sure that there is no likelihood of moisture.
effective insulation for your home
While checking the house, pay attention not only on the level and quality of insulation.
House Check for the presence of cracks, holes and holes;on the walls, along the floor, on the ceiling, doors and windows, lighting fixtures, and to a wall outlet.Check the external side of the walls, vents and openings, pipes and aqueducts.Finally, carefully check both sides of foundation walls.
If the windows are located in the draft and passed the house cold air, replace those windows with new climate suitable for your windows with good thermal insulation and high heat transfer coefficient.If you do not want to change the windows with new ones, you can use special materials for sealing windows and / or buy a set of thermal insulation for windows.The latter is cheaper.
to seal holes and cracks around windows, walls and around the sockets, use the conventional methods of sealing.To seal the crack in the wall socket using a special heat-insulating liner.For sealing holes and cracks the outer walls of the house, use a special assembly foam suitable for work in the conditions of - 40 degrees Celsius.
In order to prepare for winter as efficiently as possible, you have to call specialist at the house to install ventilation, air conditioning and heating, and get their advice.Specialists should check the chimney, determine the level of insulation in air ducts, in which case, clean air ducts and pipes, and replace the filters on a monthly basis in order to quickly achieve the desired result.
heater wrapped insulation material will reduce your heating costs.New thermostats which have the function of programming, including temperature, may also help to save a certain amount.For example, a thermostat can adjust the temperature of the day and night, allowing you to program a low temperature while you are away, giving the opportunity to reduce energy costs.