The choice of material for building a house

By Admin | Building
06 May 2016

Advantages of frame houses


Term service and technical parameters of modern frame house often leave far behind the traditional wooden construction.New materials and technologies allow to create a frame house indoor climate, like in the traditional wood, while reducing the cost of heating several times.The frame house was initially unable to provide a good thermal and humidity characteristics.Such house less inert, it does not "wet", occurs, for example, in a stone house, it is less susceptible to negative environmental influences.Frame house - environmentally friendly, comfortable and energy efficient.

Since the total weight of the carcass structure is much less than the weight of the structure of logs, brick or concrete, so the construction of a frame house economy begins with the installation of the foundation.If the area for the construction of a "weak" soil, the alternative to the carcass home almost non-existent.With frame construction is possible without significant financial investment to
give the external appearance and internal layout of the house almost any architectural form.There is an opportunity to realize the original ideas of the architect and designer.And facing a frame house can be constructed in such a way that it will not be different from the houses of brick or, for example, from the house of whole logs.

Advantages of timber houses

main advantage of timber houses is that they "breathe" and retain heat better than stone houses.In such houses formed a pleasant climate for people.Wooden houses from a bar - no doubt look very nice.But the above-mentioned advantages occur only with proper construction and implementation of all the requirements for design and construction of log houses.

in the construction houses of timber often used conifers: spruce, larch, pine, fir, cedar.And for the construction of load-bearing structures at home more suitable pine or larch.These rocks, in contrast to spruce and fir are less susceptible to decay processes.In Europe, the most widespread pine as the most affordable building material.Hardwood used much less often, are the most used oak, beech, birch, ash, aspen.

The structure Wood is a natural polymer, forming its cell-fibers are directed along the barrel and have a tubular shape.Therefore, it has a number of advantages: elasticity, high strength, low density and weight, low thermal conductivity, natural decorative, resistance to chemical environments and that is not unimportant, simple processing and assembly.Of particular importance is the low thermal conductivity of wood, because the lower it is, the more it will be warmer in your home.

Advantages of wooden houses from logs

Houses made of logs have virtually the same advantages and disadvantages as the log houses, moreover, they should not be warm because the outer surface of a front wall.The advantage of a wooden house from logs is that the rounded shape of the beam allows for a tight connection logs.By European standards drop diameter logs should not exceed 2-4 mm.

During aging Round logs less deformed, and a big plus is that the house, built of round logs do not require finishing, because almost the same diameter and high quality processing.

Thanks to its heat insulation, energy saving and environmental characteristics of wood has earned fame as the best building material.

Necessary grooves and locks in the round logs are mathematically verified shape and made with very high precision - resulting in crowns rounded houses have minimum clearances, and logs can be connected at any desired angle.

Advantages brick house

Houses of brick decades will save heat, bring comfort to their owners.Brick House - a structure that could be inherited over several generations, at least within 100-150 years.

spacious brick house, regardless of the architecture, without any doubt can be called familial home.The use of modern insulating materials enables you to implement an effective technology insulation home.Insulated wall of the house, built on such technologies, corresponds to heat loss of a brick wall thickness of 2 meters.

Plain brick wall thickness of 510 mm longer runs on modern Russian heat engineering standards.In order to achieve the required resistance to heat transfer wall, today it is necessary to do it or thickness of 610 mm or warm.Thermal insulation is carried out in two ways: internally and externally.

would like to list the main advantages of brick houses:
- durability
- low susceptibility to atmospheric influences
- nonsusceptibility biological factors
- high strength design
- high degree of protection against fire