Beautiful kitchen hood with his hands

By Admin | The Hands
29 April 2016

When equipping the kitchen, people usually think about the size and location of the larger items like refrigerator, washing machine, wardrobe, desk, etc.And often it turns out that the purchase and installation of kitchen furniture have forgotten to take into account the size of the hood.And because these devices to purify the air smoke produced standard width, the seemingly minor miscalculation can be a real problem.Even if we can find the right size hood, its design can not match the interior room or your expectations.

can certainly be satisfied than necessary.However, the forum member "Home and cottage" Aleskerov advises not to forget that the hood - is a "person" cuisine.Such problems forumchanin used to solve creatively, relying on his skillful hands and imagination.Especially in his house always want to have something unique that no other.

the basis of its author's drawing took forumchanin bought electrical pyramidal shape.For the production of new building materials are needed:

  • furniture plywood thickness of 4 mm;
  • bars of round, square and rectangular cross-section;
  • decorative grille;
  • corner and Framing strips;
  • PVA glue;
  • coat and undercoat on wood;
  • screws;
  • construction serpyanka (prokleivat joints to the body);
  • adhesive and grout for tiles;
  • matt white paint.


  • jigsaw;
  • screwdriver;
  • drills on a tree;
  • hacksaw;
  • emery fine and coarse paper;
  • Phillips screwdriver;
  • carpentry clamp;
  • paint roller and brushes;
  • pencil;
  • roulette;
  • large square;
  • construction stapler;
  • knife.

Electric hood and decorative housing - two elements that are attached to the wall above the stove independently.First base Aleskerov collected exhaust.Portal sheathed baguette and corner bars.Use the carpenter's frame, he created an original form of the hood.

forumchanin produced from cardboard template on which a thin plywood cut out of the wall.Their carefully oshlifoval and covered with primer.After slowly pasted on the walls of the frame.This process requires special care.Aleskerov taped seams serpyanka, Stopper and sanded surface.

Finally, the hood was painted.Finally forumchnin established portal decorative border prefabricated portal on aprons and laid tile.

on materials forum participant "Home and Cottage"