The method of aligning a country site

By Admin | Recommendations
06 May 2016
Now everything is fine.To do this, I bought 8 beams b / y (the so-called crane beams) length of 5.5 meters height of 80 cm and 50 cm wide. Weight approx.4-5 tons.

for alignment and compensate for the lack of height (it must be 1.5 m, and has a 80 cm) filled T-bars on the level (see 150-80).

Then tap (better to take the 15-ton crane) laid on these pillars, asthe length of 34 meters, which is not a multiple of 6 beams (5.5 * 6 = 33 m) was putting a clearance of 50 cm.

Next beams welded together rods and skylight poured concrete.
The method of alignment section The method of alignment section
The method of alignment section The method of alignment section


it's cost me (beams 200rh8 = 1600r, transportation 2000P, 2000P Crane) = 5600r that is a gift.

/ Council gave a respected member of the forum "Home and cottage" /