Home "kit" for the repair (tools)

By Admin | Tools
25 April 2016

whole instrument is divided into professional and non-professional.Professional is designed for heavy loads and longer operating, and is much more expensive than a non-professional.The most famous manufacturer of hand tools, "Wiest Group», S & amp; R Power, Stanley, Sandvik-Bacho, Osborn, Felo and others.

most often used in the home hammer and chisels, files, saws, drills, screwdrivers, and adjustable wrench.Complement the packaging home kit to repair the brush and rollers for painting walls and other surfaces.


If you've ever had to screw in the screws a half-dozen tiny holes ordinary screwdriver, then you can imagine how tedious this work.Most often used for minor repairs or finding damage required several screwdrivers medium in size and smaller.

Choice screwdrivers huge: there are direct sting, cruciform, with additional guides, hexagonal exterior and interior, there is also a screwdriver under the fixture to the inner profiled six-pointed star.Most extended handle made of powder or m

olded plastics.The strength of the rod depends on the type of metal.The durability of the tool provides high-alloy steel.Rod length - from very small to several times the length of the handle.There screwdriver with two curves, with a flexible shaft, insert between the handle and trailer that allows for bending.

to work in tight spaces are angled screwdriver with a "rod" between the handle and the working body.Screwdrivers with clamps or attached to the working body clamps hold the small screws screwed in, which also facilitates the work.Using a screwdriver or beveled elongated handle allows you to significantly weaken the effort.However, more effective screwdriver equipped with a ratchet mechanism that allows the hand "break" between the swirl motion.

There are new kinds of screwdrivers, which are easier to work extremely - are automatic screwdrivers, almost effortless in its application and twisting the bolts to the limit.This is a very handy tool, equipped with interchangeable nozzles, the latter, as a rule, permanent magnets and easily come from either the arm or body.Tips are not lost because they are stored inside the handle.The basic package contains 6-12 tips, but you can purchase them separately.Should the screwdriver about 25 USD


paint roller, probably the most popular tool for painting not only walls, but also floors, ceilings.Although small lifetime of the tool, its advantage is the ease of manufacture and consequently low price.Universal rollers and professional quality coats and different diameter of the rod.The rollers are divided into groups according to size and purpose - mini, midi and maxi.Facade rollers characterizes the interior of the intermediate printing and improved bearing system.Due to this in combination with a larger diameter roller rotates slower than normal, and when using such a tool is much less ink is sprayed.Frame rollers is very easy to work, so it is easy to wrap around the bumps.Furthermore, they are 20-35% cheaper than traditional roller (coat is not worn on the cylinder, as in the others, and the special frame made of wire or polymer.

Special rollers divided into roller floor, wavy surfaces, corrosive and structural materials,laminating and stitching wallpaper. fur coat roller may be made of polyester, foam, artificial fur (Vestal), polyacryl and polyamide. By natural materials include fur sheep, llamas, goats, velor, felt, rubber, and mohair. Choosing roller exceptthe material itself coats need to pay attention to its compatibility with the paints, which you intend to use. On the stability of coats of paint to the impact can be judged by coated with a strip - the more, the more resistant material to aggressive substances. In addition,the strip can be determined by way of its manufacturing and interchangeability. If the strips to travel along the roller coat - so it is stitched, and it can be replaced.If they are placed across or diagonally, then coat glued and can not replace it.


Filing perform a variety of purpose, size and shape files.This operation is to remove the layer of metal or wood is usually done after felling and cutting to make the necessary clarity and precision.There are rough (rough) filing, when the metal layer is removed more than 0.5 mm, and fine (finishing) - less than 0.1 mm.Files are divided into normal metalwork of general purpose, designed to perform a wide range of mechanical works on metal, and special.According to the number of cuts per 1 cm length Files are divided into six rooms.For example, files with a notch №0 and 1 have the largest teeth and are used for rough filing products (when you want to remove a layer thickness of 0.5-1 mm).Files number 2 is used to finish filing, removable layer of the metal does not exceed 0.1 mm.Files scored number 3, 4 and 5 are used for finishing.They remove a layer thickness of 0.02 mm.

In addition, files are divided into general-purpose seven types: square-toed (flat), sharp-nosed, square, triangular, round, half-round and rhomboid.Files flat square-toed designed primarily for filing flat surfaces, sharp-nosed plane is used for filing flat surfaces, and cutting the rectangular slots.Square and flat surfaces treated with rectangular grooves and holes, three-edged saw round inner corners in the grooves of different parts and cut out triangular hole and multifaceted.Round file treated spherical surfaces and sawed round holes, semicircular used for flat and spherical surfaces, rhombus sawed profile grooves, sharp edges and perform other vypilovochnye work.

electric drill, hand drill and KOLOVOROT

In a domestic environment the hole can be drilled using an electric drill, hand drill or a brace, without these tools, you do not really perform any kind of serious repair.To simply nailed in most modern apartments with their reinforced concrete walls and wallpaper the top already need a drill ...

Of course, the tool must have the necessary set of drill bits.Sverlova set contains a metal drill and drill bits;designed for wood or concrete, you should not use them for other purposes.Holes with a diameter of over 25 mm is better to drill two drills: drill diameter of the first set to take about half the diameter of the second.

a chisel and a hammer

using a chisel and a hammer made cutting.These tools are used to remove the metal layer from a workpiece, cutting of different shapes of holes and grooves, separating any portion of sheet metal and strip.Felling is very laborious and unproductive, its accuracy is not more than 0.5-1 mm.Angle sharpening chisels selected depending on the hardness of the treated metal: the harder the metal, the "stupid" wedge angle.Featured sharpening angles for cutting cast iron and bronze - 70 degrees, steel - 60 °, brass and copper - 45 degrees, aluminum and zinc - 35o.Producing cutting a metal plate or the workpiece is clamped in a vise.

DIY unlikely to be enough of a hammer - need a small lightweight hammer for delicate work, as well as more severe for driving thick and long nails.Hammer with "claw" is perfect for any carpentry: this hammer can be easily and quickly put in the largest tree nails and slanting immediately pull out easily.For carpentry will also need a hammer with a notch on the striker.Very thin nails before completely to drive them into the material clog plumbing hammer with a pointed striker.